Mellanox Technologies and Oclaro Team Up to Connect 100Gb/s PSM4 Silicon Photonics to Next Generation 25Gb/s LR Transceivers for Servers and Storage
HPC Today  |  Wire  |  September 17, 2016
Note: the wired news below has been filtered but not edited by HPC Today.

New Solution Scales 25Gb/s Ethernet Networks, Using Single Mode Fiber to Interface with 100Gb/s Switches and Routers

Mellanox Technologies, Ltd. (NASDAQ:MLNX), a leading supplier of high-performance, end-to-end interconnect solutions for data center servers and storage systems, today announced that it has teamed up with Oclaro, Inc., to seamlessly connect that company’s 1310nm LR (Long Reach) SFP28 transceiver line with Mellanox Technologies’ 1550nm PSM4 transceivers. The solution enables linking servers, storage, and network appliances to network switches, and demonstrates the transparent interoperability between transceivers of differing wavelengths.

Mellanox Technologies will be demonstrating the solution at the largest optical event in Europe, the European Convention on Optical Communications (ECOC), Sept. 18-22, Dusseldorf, Germany. The live demonstration at Mellanox Technologies’ booth, No. 124 in Hall 3, will connect the Company’s 100Gb/s PSM4 1550nm transceivers to four of Oclaro’s 1310nm LR SFP28 transceivers over 10m of single-mode fiber, connecting Mellanox 100Gb/s Spectrum Ethernet switches to 25G/s ConnectX-4 Lx network adapters.

“Customers select PSM4 transceivers because they provide the most cost effective Ethernet links for reaches of 100m to 2km,” said Amir Prescher, senior vice president of business development, Mellanox Technologies. “We teamed up with industry leader Oclaro to demonstrate that PSM4 transceivers, with fiber breakout cables, can connect directly to four separate SFP28 LR transceivers. This enables next generation servers and storage appliances to be located anywhere in the data center or even across campus.”

“We are pleased to team with Mellanox Technologies to show our 1310nm LR transceivers working with Mellanox’s 1550nm transceivers,” said Yves LeMaitre, President, Optical Connectivity Business at Oclaro. “This illustrates the strength of our transceiver design as being capable of interoperating at multiple wavelengths.”

The Mellanox Technologies ECOC booth will also feature live demonstrations of the entire LinkX interconnect product portfolio linking Mellanox 100Gb/s switches and high-speed servers, including:

  • SN2410: 48-port 25GbE + 8-port 100GbE Open Ethernet Top-of-Rack Switch
  • SN2100: Half-Width 16-port Non-blocking 100GbE Open Ethernet Switch
  • ConnectX-4 single and dual port network adapters in 25/50/100G combinations
  • 25/50/100G Direct Attach Cables (DAC) and Active Optical Cables (AOCs)
  • 25G SR and 100G SR4, multi-mode transceivers
  • 100G LR4 10km, 1310nm, single-mode transceiver
  • 100G PSM4 2km, 1550nm, Silicon Photonics single-mode transceiver
  • 100G WDM4 2km, 1550nm, Silicon Photonics single-mode transceiver

Mellanox Technologies Presentations:

  • Silicon Photonics Optical Engines for 400G/800G Cobo on Board Optics and Next Generation Pluggables.
  • Next Generation Ultra-Broadband Silicon Photonics-Based Integrated Circuits.
  • Bringing Technology to Market.

Source: Mellanox
with Business Wire

© HPC Today 2024 - All rights reserved.

Thank you for reading HPC Today.

Express poll

Do you use multi-screen
visualization technologies?

Industry news

Brands / Products index